HYDRAULIC SURFACE GRINDER
SPECIFICATION : A: HYD.LONG.FEED,MOTORISED CROSSFEED & RAPID VERTICAL
DOWNFEED. AD: HYD.LONG.FEED,MOTORISED CROSSFEED & AUTO
DOWNFEED. ADC: HYD.LONG.FEED,MOTORISED CROSSFEED & AUTO DOWNFEED
WITH SPARKOUT & PLUNGE GRINDING. MODELS DESCRIPTIONS STP-1022 STP-1428 STP-1834 STP-2040 A AD ADC A AD ADC A AD ADC A ADC GENERAL
CAPACITY Table size 200 x 500mm 300 x 600mm 400 x 800mm 500 x 1000mm Max. grinding length 550mm 650mm 850mm 1050mm Max. grinding width 210mm 310mm 410mm 510mm Distance from table surface to spindle center 415mm 510mm 465mm 600mm Max. table load (inc chuck) 300 kgs 400 kgs 580 kgs 1100 kgs Standard mag chuck size 200x500mm 300x600mm 400x800mm 500x1000mm Longitudinal
Movement Manual travel 620mm 710mm 960mm 1200mm Hydraulic traverse 570mm 650mm 920mm 1150mm Table speed (infi variable) 3-25 M/min 3-25 M/min 3-25 M/min 3-25 M/min Cross
Movement Manual travel 220mm 320mm 430mm 530mm Rapid travel (60C/50C) 960/800mm/min 960/800mm/min 1200/1000mm/min 1710/1425mm/min Auto increment feeds 0.5-8mm 0.5-8mm 0.5-8mm 2-10mm Handwheel per graduation 0.02mm 0.02mm 0.02mm 0.02mm Handwheel per revolution 4mm 4mm 5mm 5mm Vertical
Downfeed Rapid traverse (60C/50C) 190/160mm/min 190/160mm/min 190/160mm/min 285/240mm/min Auto. downfeed (AD) 0.002/0.006/0.01mm 0.002/0.006/0.01mm 0.001/0.003/0.05mm - Auto. downfeed (ADC) 0.001~0.999mm 0.001~0.999mm 0.001~0.999mm 0.001~0.999mm Micro feed (per turn) - - - 0.02mm - Handwheel per graduation 0.002mm 0.002mm 0.001mm 0.005mm Handwheel per revolution 0.2mm 0.2mm 0.1mm 0.1mm Grinding
Wheel Wheel aize (diaxwidthxbore) 205x22x32mm 305x31x76mm 355x50x127mm 355x50x127mm Spindle speeds (60C/50C) 3420/2850 rpm 1710/1425 rpm 1710/1425 rpm 1710/1425 rpm Motors Spindel motor 2 hp 3 hp 5 hp 7.5 hp Cross feed motor 1/5 hp 1/5 hp 1/5 hp 1/2 hp Elevating motor 1/4 hp 1/4 hp 1/4 hp 1/2 hp Hydraulic motor 1 hp 2 hp 3 hp 3 hp Weight Net (approx) 1300 kgs 1750 kgs 2700 kgs 4300 kgs Gross (approx) 1500 kgs 2050 kgs 3000 kgs 4800 kgs packing
Size Length x width x height 185x148x212 cm 191x181x217 cm 266x209x225 cm 300x225x235
cm
8 x 20"
12 x 24"
16 x 32"
20 x 40"
SPECIFICATION :
|
STP-618 |
STP-1A618 | |||
|
General Capacity |
Table size |
150x460mm(6x18") |
150x460mm(6x18") | ||
|
Max. grinding length |
475mm(18-3/4") |
475mm(18-3/4") | |||
|
Max. grinding width |
160mm(6-1/3") |
160mm(6-1/3") | |||
|
Distance from table surface to spindle center |
400mm(15-3/4") |
400mm(15-3/4") | |||
|
Standard mag chuck size |
150x460mm(6x18") |
150x460mm(6x18") | |||
|
Longitudinal Movement |
Manual travel |
485mm(19") |
485mm(19") | ||
|
Hydraulic traverse |
- |
480mm(18-15/16") | |||
|
Table speed (infi variable) |
- |
3~25 mm(1/8~1") | |||
|
Cross Movement | |||||
|
Manual travel |
180mm(7") |
180mm(7") | |||
|
Auto increment feeds |
- |
1~10mm(1/16~1/3") | |||
|
Handwheel per graduation |
0.005mm(0.0002") |
0.005mm(0.0002") | |||
|
Handwheel per revolution |
1mm(0.05") |
1mm(0.05") | |||
|
Grinding Wheel | |||||
|
Wheel size (dia x width x bore) |
180x13x32mm |
180x13x32mm | |||
|
Spindle speeds (60C/50C) |
3600/3000 rpm |
3600/3000 rpm | |||
|
Motors | |||||
|
Spindle motor |
1.5 HP |
1.5 HP | |||
|
Cross feed motor (2A/3A) |
- |
1/6 HP | |||
|
Elevating motor (3A) |
- |
1/4 HP | |||
|
Hydraulic motor (1A/2A/3A) |
- |
1 HP | |||
|
Weight | |||||
|
Net (approx) |
720 kgs (1584 lbss) |
885 kgs (1947 lbss) | |||
|
Cross (approx) |
850 kgs (1870 lbs) |
1015 kgs (2233 lbs) | |||
|
Packing Size | |||||
|
Length x width x height |
1300x1150x1980mm |
1600x1150x1980mm | |||
|
NOTE : The contents of this brochure are for reference only and are subject to change without notice. |
For more information contact NOVATECH, INC. at 800.866.6682 or visit our web site at http://www.novatechonline.com